Common Booster pump problems
1. Blocked Pump Filters
When you have poor water flow from your shower head, you should make sure it is properly cleaned and scaled. However, if this does not help, the filter inside the pump may be blocked. This often happens in areas with hard water, or can be caused by debris getting into the filter during installation.
Before you start, you need to switch off the service valves and ensure the electrical supply to the pump is disconnected. The filters need to be removed and then gently cleaned. They are usually positioned behind the pipes connected to the impellers. Once they’ve been replaced, you can reconnect the pump and refill it.
Another common problem withBooster pumps is airlocks, which can restrict the flow. To remove the air, the pump will need bleeding. Switch off the pump’s electrical supply, and turn on the shower mixer and other taps that the pump feeds to empty the water and then switch them off again. The pump can be vented directly by taking the connection pipes out once the valves have been turned off.
3. A Noisy Booster pump
Noisy pumps are not just inconvenient; they can also be a sign of a more worrying problem. The noise could indicate that the pump is jammed and not allowing the impellers to rotate. This could be a result of limescale building up in hard-water areas, the seals could be stuck or there could be an electrical issue.
Older pumps can also become noisy due to where they are positioned or a problem with the pipes. The pump should have anti-vibration feet fitted, and the pipework needs to be properly supported.
4. A Cold Pump
Shower pumps will not perform efficiently if they get too cold, so it’s important to protect it with insulation. This will stop it bursting or becoming damaged in freezing weather.
5. A Leaking Pump
The seals on pumps can deteriorate after a period of time. If your pump begins to leak, it could be that they need replacing.
For more info contact booster pump supplier in uae or call us at +971 4 252 2966
Your comment will be posted after it is approved.
Leave a Reply.